离子色谱法测定混凝土外加剂中硫酸钠含量

建立了一种离子色谱法测定混凝土外加剂中硫酸钠含量的方法,外加剂试样溶于水中,采用反相柱去除溶液中有机物,进样量25μL。经Dionex IonPac AS18色谱柱分离,用30 mmol·L~(-1)氢氧化钾溶液作流动相,以1.0 mL·min~(-1)流量进行洗脱,按峰面积定量。方法的检出限(3S/N)为3μg·L~(-1)。该方法可实现硫酸钠与氯离子同时测定的优点。在3个浓度水平上对方法的精密度作了考核,测得其相对标准偏差(n=6)均小于1%。用标准加入法,以实样为基体作回收试验,测得回收率在98.7%～100.5%之间。     

Where Forward-Looking and Backward-Looking Models Meet

The present paper begins by deriving an instantaneous formulation for the backward-looking (reinforcement based learning) satisfaction balance model of Gray and Tallman (1984). This model is then used to generate interactional data from four simulated agents in a network interaction experiment. Because this initial model does not generate stable interaction structures in the network experiment, it is altered step by step in the direction of a forward-looking (agent with goals) model that has been shown to generate such stable interaction structures. The purpose of the modifications are to learn what aspects of the forward-looking model are needed to evolve a stable interaction structure, and to learn how these aspects may be incorporated into a model that remains essentially reinforcement based.     

Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.     

MULTI-SCALE NUMERICAL MODEL FOR SIMULATING CONCRETE MATERIAL BASED ON FRACTAL THEORY

A new multi-scale numerical model is presented using the fractal theory and adopting FEM to simulate the failure of concrete.The relation between the fractal box dimension in large scale and the damage to concrete in small scale is deduced.And the evolutionary process of elastic modulus and strength in small scale is given.Consequently,the multi-scale numerical model is proposed to describe the constitutive relation of concrete between small scale and large scale.A two-dimensional static analysis of a concrete block is performed by using this model and the calculation result is discussed.The propagation of cracks of the concrete block is also studied.     

Flexural reinforcement of concrete floor slabs by carbon fiber textiles

The effect of carbon fiber textile for flexural reinforcement to deteriorated reinforced concrete floor slab is tested in laboratory by cutting out six specimens from existing structure aged more than 70 years. The repair method between concrete and carbon fiber textile is used as experimental parameter. From the test results, deformation, bond characteristic of carbon fiber textile and the applicability of carbon fiber textiles to flexural reinforcement of floor slabs are discussed.     

Effect of particle agglomeration and interphase on the glass transition temperature of polymer nanocomposites

In this article, we utilize finite element modeling to investigate the effect of nanoparticle agglomeration on the glass transition temperature of polymer nanocomposites. The case of an attractive interaction between polymer and nanofiller is considered for which an interphase domain of gradient properties is developed. This model utilizes representative volume elements that are created and analyzed with varying degrees of nanoparticle clustering and length scale of interphase domain. The viscoelastic properties of the composites are studied using a statistical approach to account for variations due to the random nature of the microstructure. Results show that a monotonic increase in nanofiller clustering not only results in the loss of interphase volume but also obstructs the formation of a percolating interphase network in the nanocomposite. The combined impacts lead to a remarkable decrease of T_g enhancement of clustering nanofillers in comparison with a well‐dispersed configuration. Our simulation results provide qualitative support for experimental observations that clustering observed at high nanofiller concentrations negatively impacts the effects of the nanofiller on overall properties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Opinion strength influences the spatial dynamics of opinion formation

Opinions are rarely binary; they can be held with different degrees of conviction, and this expanded attitude spectrum can affect the influence one opinion has on others. Our goal is to understand how different aspects of influence lead to recognizable spatio-temporal patterns of opinions and their strengths. To do this, we introduce a stochastic spatial agent-based model of opinion dynamics that includes a spectrum of opinion strengths and various possible rules for how the opinion strength of one individual affects the influence that this individual has on others. Through simulations, we find that even a small amount of amplification of opinion strength through interaction with like-minded neighbors can tip the scales in favor of polarization and deadlock.     

Preparation and Characterization of Cyclohexyl Moiety Toughened POSS-Reinforced Epoxy Nanocomposites

Polyhedral oligomeric silsesquioxane (POSS)-reinforced epoxy nanocomposites were prepared by reacting commercially available diglycidyl ether of bisphenol-A (DGEBA) and tetraglycidyl diamino diphenyl methane (TGDDM) epoxy resins with 1,1-bis(3-methyl-4-glycidyloxyphenyl)cyclohexane (Cy-Ep) separately and reinforced with POSS nanocluster. POSS (OAPS)-reinforced hybrid Cy-Ep-epoxy resin castings were characterized for their mechanical and morphological properties. The data obtained from mechanical studies indicated that the incorporation of nano OAPS into Cy-Ep modified hybrid systems results in improved stability. Among the epoxy systems studied, the TGDDM-based hybrid epoxy system exhibited higher values of tensile and flexural properties than that of the DGEBA hybrid epoxy system, whereas the impact strength of the DGEBA system was higher than that of the TGDDM system. The dispersion of POSS was confirmed by scanning electron microscopy and visual observation studies.     

Nanoalloy Based on Clays: Intercalated‐Exfoliated Layered Silicate in High Performance Elastomer

A novel method is described for the preparation of nanocomposites comprising a high performance rubber for tire application and layered silicates clay. In this work nanocomposites of solution‐styrene butadiene rubber (S‐SBR) with montmorillonite layered silicate were prepared with carboxylated nitrile rubber (XNBR), a polar rubber, as a compatibilizer. A sufficient amount of organomodified layered silicate was loaded in carboxylated nitrile rubber (XNBR) and this compound was blended as a master batch in the S‐SBR. Mixed intercalated/exfoliated morphologies in the nanocomposite are evinced by X‐ray diffraction measurements and transmission electron microscopy. Dynamic mechanical analysis also supports the compatibility of the composites. A good dispersion of the layered silicate in the S‐SBR matrix was reflected from the physical properties of the nanocomposites, especially in terms of tensile strength and high elongation properties.     

混凝土中的声发射波速特性及其在源定位中的应用*

利用声发射技术监测受载混凝土裂缝发展特征的首要任务是对声发射源的准确定位。为了解混凝土中声发射波速特性,提高声发射源定位精度,该文开展了一系列室内试验,构建了考虑衰减现象的声发射波速修正模型,优化建立了基于修正波速的区域穷举定位法。结果表明:水灰比越小,基准波速越大,波速随距离的衰减越大。骨料粒径越大,基准波速越大,波速随距离的衰减越大。直线距离小于500 mm时,可采用对数函数描述声发射波速与距离的定量关系,以此构建的波速修正模型满足工程精度要求。采用修正波速的区域穷举定位法对单轴压缩试验产生的裂缝进行定位时,定位点比时差定位法更接近裂缝实际位置,有效提高了定位精度。